SafetyPro™ AP2/ AP2 Max Air Purifier with SuperCyclone
xTool SafetyPro™ AP2 & AP2 Max
Unrivaled dust and odor removal, engineered for all laser users
-
Dual Performance Tiers: Choose the 150m³/h AP2 for desktop laser machine or the 700m³/h AP2 Max for industrial-grade laser cutter.
-
Up to 7 Layer Filtration: Removes 99.97% of particles, with an exclusive formaldehyde filter on the AP2 Max.
-
4x Filter Capacity: The AP2 Max features a larger filter system for a 4x longer lifespan and fewer changes.
-
Cyclone Separation Technology: Capture Large Particles, 10X Pre-filter's Lifespan.
-
Intelligent Control：Auto-On/Off, Sync with xTool Lasers & Tailored Setting for Every Material.
Which One Suits You Better?
High-Density Filtration, Layer by Layer, Total Peace of Mind
Authority Tested,
Pure Air Guaranteed
SGS approved, setting a new standard for laser purifiers, enjoying fresh air anytime.
SuperCyclone Separation Technology
The Best Solution for Dust Collection
99% Capture Large Particles
With a cyclone in place, all large particles can be separate, extending the lifespan of filters up to 10 times compared to those without a cyclone.
It is easy to clean and reuse. Simply wash it to keep the cyclone working like new, saving you the cost of replacing pre-filters.
Powerful Airflow, Rapid Purification
The AP2’s 150m³/h airflow efficiently purifies desktop tasks. The AP2 Max unleashes a dominating 700m³/h, engineered for thick, large-format industrial laser and welding jobs.
Breathe Fresh Air Even in Laser Cutting
Medical-Grade Protection
Ultra-Dense Mesh, Stronger Absorption
AP2 Max Exclusive
Decomposing Formaldehyde for a Deeper Clean
Intelligent Control
Beyond Convenience, Smarter Than You Think
Auto-On/Off, Sync with xTool Lasers
The purifier automatically starts and shuts down with the xTool lasers. You can also customize the shutdown time to ensure all fumes are expelled.
Tailored Setting for Every Material
The purifier automatically matches the optimal filtration mode based on the material selected by the user.
Filter Life Cycle Monitoring
The system monitors filter usage in real-time, preventing premature replacements or missed change intervals, and optimizing cartridge efficiency.
Well-Designed for A Better Experience
Upgraded Motor, Super Suction
High-torque centrifugal motor, bringing greater fan output power, rapid exhaust of polluted gases.
Easy to Change Filter Cartridge
Pull-out Magnetic Door Design, no need to dismantle the machine. Simply pull to open, making it easy to remove, wash, and replace the filter.
Low-dB Operation, Non-Disruptive
PP adjustable hard tube has good flexibility and plasticity, can be bent and adjusted according to the actual needs, to adapt to different installation environments.
The Safer Way to Create
FAQ
Is the AP2 Max suitable for other brands of laser cutters and welders?
Yes, it is suitable if your machine's fume extraction requirement is 700 m³/h or less and its exhaust port diameter is within 60-110mm or 200-250mm. However, the smart features will not function.
Is the AP2 suitable for other brands of laser machines?
The AP2 is designed for machines with a smoke extraction capacity of 150m³/h or lower. If your machine falls within this range, it should work with the AP2. However, you will need to prepare the adapter for the exhaust port yourself.
The product supports a 3-inch exhaust pipe. It's compatible with laser machines, hybrid 3D printers with laser modules, and DTF, 3D printers, as long as their exhaust pipe matches this size.
Why isn't the xTool P3 compatible with the AP2?
The AP2 is designed for machines with a fume extraction of 150 m³/h or less, but the P3’s fume extraction is 238 m³/h. The AP2’s airflow cannot meet this demand. As a result, if you connect a P3 to an AP2 for cutting, there will still be significant smoke and odor.
Can the AP2 and AP2 Max be used with IF2 2.0 inline duct fan?
The AP2 can be used with IF2 2.0. But AP2 Max can't. The airflow rate of the AP2 Max and an external duct fan are significantly different. Using them together will cause the purifier or the duct fan to stall and trigger a fault alarm.
Can the air outlets be vented directly into the room?
Yes, exhaust air can be discharged directly into the room because our purified exhaust air meets the air quality requirements for direct indoor exhaust.
How often should the cyclone be cleaned?
It’s recommended to clean it every 6 months, but users can adjust this based on actual usage conditions.