Matter3D Performance PETg is made from 100% pure Eastman 6763 resin and has a natural transparent color. This material is highly durable, high strength, food safe and extremely chemically resistant. Performance PETg is easier to print than ABS or Nylon, but offers many of the same advanced properties as those engineering-grade resins. Our PETg is designed to be printed fast with minimal stringing. If you are encountering some stringing and you are sure your material is dry, dial back the extrusion multiplier or flow rate (5-10%) and this issue will go away.

Benefits of PETG Include:

• Superior chemical resistance when compared to ABS
• Very low odor while printing
• Amorphous structure giving it a low, near isotropic shrinkage

• Low moisture absorption, 3x lower than ABS

• Wide range of processing temperatures between: 230-260°C
• Superior ductility vs. ABS

Chemical Resistance of PETG:

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, as well as aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons still dissolve or swell the plastic.

Matter3D’s Performance PETg is precision extruded and immediately vacuum-sealed before shipping with desiccant for protection against moisture. This product is available in 1 kg spools (2.2 lbs). Matter3D always recommends drying your filaments before use. This filament is ideal for use with practically all desktop 3D printers, such as Makerbot, Prusa, Ender, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75 mm or 2.85 mm filament.
Proudly compounded and manufactured in Canada!

 

Specifications:

Matter3D's Performance PETg series is not able to be annealed. This is a result of the lower crystallinity of the bulk polymer. 

Product Name: Performance PETg
Product Code: FIL-1030-00-10-1-XXX
Diameter: 1.75 +/- 0.05mm
Weight: 1 kg
Length: 328 m
Density: 1.27 g/cc
Nozzle Size: ≥ 0.15 mm
Nozzle Temp: 220 - 250 °C
Bed Temp: 75 °C
Bed Prep: Hairspray, Glue Stick, Polyimide (Kapton) surface
Layer Height: ≥ 0.1 mm
Print Speed: ≤ 100 mm/sec
Fan speed: 0 - 20%